Researchvpn

How to Activate Jio eSIM After a Factory Reset in 2026

How to Activate Jio eSIM After Factory Reset in 2026

Factory resetting your phone deletes all data — including Jio eSIM profiles in most cases. Unlike physical SIM cards, which stay in the tray during a reset, eSIM profiles are stored in device memory and may be wiped during a factory reset. Reactivating Jio eSIM after a factory reset requires specific steps — some easier than fresh activation, some requiring Jio customer care assistance.

How to Activate Jio eSIM After a Factory Reset in 2026

A factory reset can sometimes cause problems with your Jio eSIM, especially if you erase your phone without checking whether your eSIM profile is backed up or can be restored. After resetting your device, you may find that your Jio network is missing, calls are not working, or mobile data is unavailable. This can be confusing, particularly if you use an eSIM instead of a physical SIM card.

Activate Jio eSIM After Factory Reset: The good news is that you may be able to restore your Jio eSIM without changing your mobile number. However, the process depends on whether the eSIM profile was deleted during the factory reset or is still available on your device. If the profile has been removed, you may need to request a replacement eSIM activation through Jio.

How to activate Jio eSIM after a factory reset in 2026, including how to check your eSIM status, restore your connection, request a new activation QR code, and fix common activation problems. We will also cover a few important precautions to help you avoid losing access to your Jio number again.


Does Factory Reset Delete Jio eSIM?

Device-Specific Behavior

iPhone:
Factory reset → eSIM profile usually deleted → needs reactivation.
Exception: “Erase All Content and Settings” → option to keep eSIM plans → if selected → eSIM survives.

Samsung:
Factory reset → eSIM profile deleted → reactivation required.

OnePlus/Realme:
Factory reset → eSIM deleted → fresh reactivation needed.

Key point: Same Jio number → same plan → just profile needs re-downloading → no new KYC in most cases.


Good News — What’s NOT Affected

Your Jio number: ✅ Same number retained
Your Jio plan: ✅ Same plan continues
Your account: ✅ MyJio account intact
KYC status: ✅ Already verified — no re-KYC usually needed
Balance/data: ✅ Unchanged

Only thing lost: eSIM profile on device → needs re-downloading.


How to Activate Jio eSIM After Factory Reset (step by step )

Method 1 — MyJio App Re-download (Fastest)

MyJio App Re-download (Fastest)

Step 1 — Reinstall MyJio

After factory reset → Google Play/App Store → MyJio → install → log in with Jio credentials.


Step 2 — Navigate to eSIM Section

MyJio → Account → Get eSIM / Manage eSIM → “Re-download eSIM” or “Switch to eSIM.”


Step 3 — OTP Verification

Challenge after factory reset:
No active SIM on device → OTP needs to be received → options:

Option A: Email OTP → MyJio → “Send OTP to email” → receive in email → enter.

Option B: Another phone → call/WhatsApp → family member → relay OTP.

Option C: Jio international helpline (+91-22-88009999) → verify account → alternative verification.


Step 4 — QR Generated

After OTP verification → MyJio generates a new QR → scan immediately.


Step 5 — Scan and Re-download

iPhone:
Settings → Cellular → Add Cellular Plan → scan QR → eSIM re-downloads.

Android:
Settings → SIM card manager → Add eSIM → scan QR → re-download.


Step 6 — Configure

Re-enable Jio eSIM → set as default line → VoLTE ON → service restored.


Method 2 — iPhone Backup Restore

iPhone Backup Restore

If eSIM Survived Reset

iPhone “Erase All Content” option:
During iPhone reset → “Keep eSIM plans” prompt → select YES → eSIM profile preserved → no reactivation needed.

Restore from iCloud:
iPhone reset → restore from iCloud backup → eSIM profile may restore automatically → check Settings → Cellular → Jio plan present → if yes, enable → done.

If not restored:
Proceed to Method 1 → fresh re-download.


Method 3 — Call Jio 199

Direct Customer Care Method

Most reliable after factory reset:

Call 199 (from any phone):
“I factory reset my phone, and my Jio eSIM profile was deleted. I need to re-download my eSIM. My number is [number].”

Jio process:
Verify account → alternative OTP if needed → push fresh eSIM to device → scan QR or manual entry → activated.

Best for: Users who cannot receive OTP after factory reset → Jio 199is the most reliable assistance.


Jio Store Visit

Method 4 — Jio Store Visit

Documents needed:
Aadhaar card + reset phone.

Process:
Staff verifies → generates QR → scans on your phone → eSIM re-downloaded → 30 minutes.

Best for: If all app/phone methods fail → store visit guaranteed resolution.


Device-Specific Post-Reset Guide

iPhone After Factory Reset

Step 1: Setup iPhone normally
Step 2: Connect to WiFi
Step 3: Install MyJio from App Store
Step 4: Login → Get eSIM → email OTP
Step 5: QR generated → Settings →
        Cellular → Add Cellular Plan →
        scan QR → Add
Step 6: Cellular → Jio → Turn On This Line
Step 7: Voice & Data → LTE/5G
Step 8: Test call → service restored ✅

Samsung After Factory Reset

Step 1: Complete Samsung setup
Step 2: WiFi connected
Step 3: Install MyJio from Play Store
Step 4: Login → eSIM section → OTP
Step 5: QR → Settings → Connections →
        SIM card manager → Add eSIM →
        scan QR → download
Step 6: Enable Jio eSIM → set default
Step 7: VoLTE ON → test → done ✅

OTP Challenge After Factory Reset

Getting OTP Without Active SIM

Most common problem:
Factory reset → no SIM active → Jio sends OTP to Jio number → cannot receive → stuck.

Solutions:

Solution 1 — Email OTP:
MyJio → OTP to email → receive anywhere → best solution.

Solution 2 — WiFi calling:
Another app (WhatsApp Business) → receive OTP via WhatsApp → if Jio is linked.

Solution 3 — Family relay:
Family member’s phone → has your Jio number as a contact → they receive forwarded OTP → relay to you.

Solution 4 — Jio 199:
Call from another number → verify identity → Jio sends QR to email → no OTP needed.


Timeline After Factory Reset

StepTime
MyJio install + login5 minutes
OTP + verification5-10 minutes
QR generation2-3 minutes
eSIM download2-5 minutes
Network registration10-20 minutes
Total25-45 minutes

Troubleshooting Post-Reset eSIM Issues

“eSIM Already Active” Error

Cause: Jio backend still shows the old device eSIM as active.

Fix: Call Jio 199 → “Please deactivate old eSIM profile” → backend cleared → fresh QR → reactivate.


No Signal After Re-download

Fix:

  1. Network mode → 4G/LTE (not 3G)
  2. Airplane mode toggle
  3. Manual network → select Jio
  4. Restart device

QR Not Working After Reset

Fix:
Email QR → laptop screen → scan from laptop → same fixes as the QR troubleshooting article.


Backup Tips — Prevent Future Reset Issues

Before Factory Reset

iPhone backup:
iCloud → Settings → [Name] → iCloud → Backup → include eSIM settings.

Note eSIM details:
Settings → General → About → EID → note down → helps customer care identify the profile.

Contact Jio first:
Before a major reset → call 199 → note that a reset is planned → easier re-download post-reset.


Frequently Asked Questions

Does factory reset delete Jio eSIM?
Usually yes — factory reset wipes device memory, including eSIM profiles on most Android phones and iPhones. Exception: iPhone “Erase All Content and Settings” → option to keep eSIM plans → if selected → eSIM survives. Good news: Jio number, plan, account, and KYC all intact — only need to re-download eSIM profile via MyJio app → 25-45 minutes → same number restored.

How do I get Jio eSIM back after factory reset?
Install MyJio • log in → Get eSIM → verify via email OTP (safest after reset) → QR generated → Settings → Cellular/SIM manager → Add Cellular Plan → scan QR → eSIM downloads → enable → configure 4G/VoLTE → service restored. If OTP issue: call Jio 199 from any phone → staff verifies account → pushes QR to email → scan → reactivate.

Do I need to do KYC again for Jio eSIM after factory reset?
No — Jio KYC is account-level verification, not device-level. Previous Aadhaar verification remains valid. Reactivating eSIM after a factory reset requires identity verification (OTP only) but not full KYC re-submission. Exception: if the account is flagged or it has been a very long time since activation → Jio may require fresh verification → call 199 for guidance.

How do I receive Jio OTP after factory reset when no SIM is active?
Four methods: (1) Email OTP — MyJio → “Send OTP to email” → receive in email → most reliable; (2) Family relay — family member receives OTP forwarded to registered number → shares with you; (3) Jio 199 from another phone — staff verifies account differently → sends QR to email; (4) Jio store visit — in-person verification → no OTP needed → staff activates directly.

How long does Jio eSIM reactivation take after factory reset?
25-45 minutes total: MyJio install (5 min) + OTP verification (5-10 min) + QR generation (2-3 min) + eSIM download (2-5 min) + network registration (10-20 min). Faster than fresh activation — no full KYC needed typically. Longer if OTP issues arise → add 15-20 minutes for email OTP or Jio 199 call.


Conclusion

Jio eSIM reactivation after factory reset is straightforward — same number, same plan, just re-download the profile.

Fastest method:
MyJio → Get eSIM → email OTP → QR → scan → done ✅ (25-45 minutes)

OTP problem:
Call Jio 199 → any phone → staff pushes QR to email → most reliable.

Prevention:
iPhone users → “Erase All Content” → select “Keep eSIM” → avoid reactivation entirely.